| Vizsgálat típusa |
Szabványok |
Leírás |
| Szakító vizsgálat |
ISO 527 – 4 |
Plastics – Determination of tensile properties – Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites |
| Szakító vizsgálat |
ISO 527 – 5 |
Kunststoffe – Bestimmung der Zugeigenschaften – Teil 5: Prüfbedingungen für unidirektional faserverstärkte Kunststoffverbundwerkstoffe |
| Szakító vizsgálat |
ISO 4899 |
Textile-glass-reinforced thermosetting plastics — Properties and test methods |
| Szakító vizsgálat |
ISO 11566 |
Carbon fibre — Determination of the tensile properties of single-filament specimens |
| Szakító vizsgálat |
ASTM D 3039 |
Tensile Properties of Polymer Matrix Composite Materials |
| Szakító vizsgálat |
ASTM D 4018 |
Continuous Filament Carbon and Graphite Fiber Tows |
| Szakító vizsgálat |
ASTM D 3916 |
Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod |
| Szakító vizsgálat |
ASTM D 5083 |
Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
| Szakító vizsgálat |
ASTM D 7205 |
Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
| Szakító vizsgálat |
DIN 65378 |
Prüfung von unidirektionalen Laminaten; Zugversuch quer zur Faserrichtung |
| Szakító vizsgálat |
DIN 65469 |
Faserverstärkte Kunststoffe; Zugversuch an einlagigen Zugflachprobekörpern Fibre-reinforced plastics; tensile test of monolayer flat tension specimens |
| Szakító vizsgálat |
EN 2561 |
Unidirektionale Laminate – Zugprüfung parallel zur Faserrichtung Unidirectional laminates – Tensile test parallel to the fibre direction |
| Szakító vizsgálat |
EN 2597 |
Unidirectional laminates – Tensile test perpendicular to the fibre direction |
| Szakító vizsgálat |
EN 2747 |
Glass fibre reinforced plastics. Tensile test |
| Szakító vizsgálat |
EN 6035 |
Faserverstärkte Kunststoffe – Prüfverfahren; Bestimmung der Kerbzugfestigkeit an gekerbten und ungekerbten Probekörpern |
| Szakító vizsgálat |
DIN 29971 |
Luft- und Raumfahrt; Unidirektionalgelege-Prepreg aus Kohlenstoffasern und Epoxidharz; Technische Lieferbedingungen |
| Szakító vizsgálat |
Airbus AITM 1.0007 |
Faserverstärkte Kunststoffe – Bestimmung der Zugfestigkeit an ungekerbten, offen und geschlossen gekerbten Zugproben Fibre reinforced plastics: determination of notched, unnotched and filled hole tensile strength |
| Szakító vizsgálat |
Boeing BSS 7320 |
Tensile Testing of Advanced Composites |
| Szakító vizsgálat |
SACMA SRM 4R-94 |
Tensile Properties of Oriented Fiber-Resin Composites |
| Szakító vizsgálat |
SACMA SRM 9-94 |
Tensile Properties of Oriented Cross-Plied Fiber-Resin Composites |
| Szakító vizsgálat |
TR 88012 CRAG Methods 300-303 |
Tensile Testing |
| Nyomó vizsgálat |
ISO 14126 |
Faserverstärkte Kunststoffe – Bestimmung der Druckeigenschaften in der Laminatebene Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
| Nyomó vizsgálat |
ISO 604 |
Plastics — Determination of compressive properties |
| Nyomó vizsgálat |
ISO 8515 |
Textile-glass-reinforced plastics — Determination of compressive properties in the direction parallel to the plane of lamination |
| Nyomó vizsgálat |
ISO 3597-3 |
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength |
| Nyomó vizsgálat |
ASTM D 3410 |
Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading (IITRI – setup) |
| Nyomó vizsgálat |
ASTM D 695 |
Compressive Properties of Rigid Plastics |
| Nyomó vizsgálat |
ASTM D 6641 |
Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture |
| Nyomó vizsgálat |
ASTM C 1358 |
Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures |
| Nyomó vizsgálat |
DIN 65375 |
Prüfung von unidirektionalen Laminaten; Druckversuch quer zur Faserrichtung |
| Nyomó vizsgálat |
DIN V 65380 |
Prüfung von unidirektionalen Laminaten; Druckversuch parallel und quer zur Faserrichtung |
| Nyomó vizsgálat |
EN 2850 |
Unidirektionale Laminate aus Kohlenstoffasern und Reaktionsharz – Druckversuch parallel zur Faserrichtung Carbon fibre thermosetting resin unidirectional laminates – Compression test parallel to fibre direction |
| Nyomó vizsgálat |
JIS K 7076 |
Testing methods for compressive properties of carbon fibre reinforced plastics |
| Nyomó vizsgálat |
AITM 1-0008 |
Fibre Reinforced Plastics – Determination of Plain, Open Hole and Filled Hole Compression Strength. |
| Nyomó vizsgálat |
Airbus QVA-Z10-46-38 |
Bestimmung von Druckeigenschaften von CFK-Laminaten aus Gewebe-Prepreg, Prüfung in Kett- oder Schussrichtung |
| Nyomó vizsgálat |
Boeing BSS 7260 – type III and IV |
Advanced Composite Compression Tests |
| Nyomó vizsgálat |
SACMA SRM 1R-94 |
Compressive Properties of Oriented Fiber-Resin Composites |
| Nyomó vizsgálat |
SACMA SRM 6-94 |
Compressive Properties of Oriented Cross-Plied Fiber-Resin Composites |
| Nyomó vizsgálat |
RAE-TR 88012 CRAG Method 400 |
Method of test for longitudinal compression strength and modulus of unidirectional fibre reinforced plastics |
| Nyomó vizsgálat |
RAE-TR 88012 CRAG Method 401 |
Plain Compression |
| Nyomó vizsgálat |
ISO 3597-3 |
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength |
| Nyomóvizsgálat becsapódás után |
ASTM D 6264 |
Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
| Nyomóvizsgálat becsapódás után |
ISO 18352 |
Carbon-fibre-reinforced plastics — Determination of compression-after-impact properties at a specified impact-energy level |
| Nyomóvizsgálat becsapódás után |
ASTM D 7137 |
Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates |
| Nyomóvizsgálat becsapódás után |
EN 6038 |
Bestimmung der Restdruckfestigkeit nach Schlagbeanspruchung |
| Nyomóvizsgálat becsapódás után |
AITM 1.0010 |
Determination of compression strength after impact-stress |
| Nyomóvizsgálat becsapódás után |
Boeing BSS 7260 – type II |
Compression after impact |
| Nyomóvizsgálat becsapódás után |
CRAG method 403 |
Compression after impact |
| Nyomóvizsgálat becsapódás után |
SACMA SRM 2R-94 |
Compression after Impact Properties of Oriented Fibre-Resin Composites |
| Nyomóvizsgálat becsapódás után |
DIN 65561 |
Prüfung von multidirektionalen Laminaten; Bestimmung der Druckfestigkeit nach Schlagbeanspruchung |
| Nyomóvizsgálat becsapódás után |
NASA RP 1092 ST-1 |
Compression after Impact |
| Open hole / Filled hole tensile |
ASTM D 5766 |
Open-Hole Tensile Strength of Polymer Matrix Composite Laminates |
| Open hole / Filled hole tensile |
ASTM D 6742 |
Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates |
| Open hole / Filled hole tensile |
Airbus AITM 1.0007 |
Faserverstärkte Kunststoffe – Bestimmung der Zugfestigkeit an ungekerbten, offen und geschlossen gekerbten Zugproben Fibre reinforced plastics: determination of notched, unnotched and filled hole tensile strength |
| Open hole / Filled hole tensile |
SACMA SRM 5-94 |
Open Hole Tensile Properties of Advanced Composites Materials |
| Open hole / Filled hole tensile |
NASA RP 1092 ST-3 |
Open hole tension |
| Open hole / Filled hole compression |
EN 6036 |
Bestimmung der Kerbdruckfestigkeit an gekerbten, ungekerbten und gebolzten Probekörpern |
| Open hole / Filled hole compression |
ASTM D 6484 (Boeing Document 888-10026, Boeing Document 6-83079-71) |
Open-Hole Compressive Strength of Polymer Matrix Composite Laminates |
| Open hole / Filled hole compression |
ISO/DIS 12817 |
Fiber-reinforces plastic composites – Determination of open-hole compression strength |
| Open hole / Filled hole compression |
Boeing BSS 7260 – Type 1 |
Open Hole Compression Test |
| Open hole / Filled hole compression |
AITM 1-0008 |
Fibre Reinforced Plastics – Determination of Plain, Open Hole and Filled Hole Compression Strength. |
| Open hole / Filled hole compression |
SACMA SRM 3R-94 |
Open Hole Compression Properties |
| Open hole / Filled hole compression |
NASA RP 1092 ST-4 |
Open hole compression |
| Open hole / Filled hole compression |
RAE-TR 88012 CRAG Method 402 |
Open hole compression strength |
| Open hole / Filled hole compression |
Northrop NAI-1504C |
Open Hole Compression Test Method |
| Hajlító vizsgálat |
ISO 14125 |
Fibre-reinforced plastic composites – Determination of flexural properties Faserverstärkte Kunststoffe – Bestimmung der Biegeeigenschaften |
| Hajlító vizsgálat |
EN 2562 |
Unidirectional laminates – Flexural tests parallel to the fibre direction |
| Hajlító vizsgálat |
EN 2746 |
Glass Fibre Reinforces Plastics – Flexural Tests, Three Point Bend Method |
| Hajlító vizsgálat |
EN 13706-2 |
Spezifikationen für pultrudierte Profile Teil 2: Prüfverfahren und allgemeine Anforderungen |
| Hajlító vizsgálat |
ISO 3597-2 |
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength |
| Hajlító vizsgálat |
ASTM D 4476 |
Flexural Properties of Fiber Reinforced Pultruded Plastic Rods |
| Hajlító vizsgálat |
ASTM D 790 |
Flexural Properties of Unreinforced and Reinforced Plastics and Eletrical Insulating Materials |
| Hajlító vizsgálat |
ASTM D 6272 |
Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending |
| Hajlító vizsgálat |
ASTM D 7264 |
Flexural Properties of Polymer Matrix Composite Materials |
| Hajlító vizsgálat |
ASTM D 6415 |
Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite1 |
| Hajlító vizsgálat |
TR 88012 CRAG Method 200 |
Flexural modulus and strength of reinforced plastics |
| Hajlító vizsgálat |
HSR/EPM-D-003-93 |
Four Point Flexural Testing of Composite Materials |
| Hajlító vizsgálat |
DIN 53390 |
BIEGEVERSUCH AN UNIDIREKTIONAL GLASFASERVERSTAERKTEN RUNDSTAB-LAMINATEN |
| Rétegközi nyírószilárdság |
ISO 14130 |
Determination of apparent interlaminar shear strength by short beam-method |
| Rétegközi nyírószilárdság |
ISO 3597-4 |
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength |
| Rétegközi nyírószilárdság |
ASTM D 2344 |
Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
| Rétegközi nyírószilárdság |
ASTM D 4475 |
Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method |
| Rétegközi nyírószilárdság |
EN 2377 |
Glasfaserverstärkte Kunststoffe; Prüfverfahren zur Bestimmung der scheinbaren interlaminaren Scherfestigkeit Glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength |
| Rétegközi nyírószilárdság |
EN 2563 |
Kohlenstoffaserverstärkte Kunststoffe – Unidirektionale Laminate; Bestimmung der scheinbaren interlaminaren Scherfestigkeit Carbon fibre reinforced plastics – Unidirectional laminates; determination of apparent interlaminar shear strength |
| Rétegközi nyírószilárdság |
JIS K 7078 |
Apparent Interlaminar Shear Strength of Carbon Fiber Reinforced Plastics by Three Point Loading Method |
| Rétegközi nyírószilárdság |
SACMA SRM 8-88 |
Short Beam Shear Strength of Oriented Fiber-Resin Composites |
| Rétegközi nyírószilárdság |
CRAG method 100 |
Interlaminar shear strength (ILSS) of reinforced plastics |
| In-plane shear by Lap-Shear |
EN 2243-1 |
Structural Adhesives Test Methods Part 1 – Single Lap Shear, Aerospace Series |
| In-plane shear by Lap-Shear |
EN 2243-6 |
Structural adhesives. Test methods. Part 6. Determination of shear stress and shear displacement |
| In-plane shear by Lap-Shear |
EN 6060 |
Determination of the Tensile Single Lap Shear Strength |
| In-plane shear by Lap-Shear |
AITM 1-0019 |
Determination of lap shear tensile strength of composite joints |
| In-plane shear by Lap-Shear |
Airbus QVA-Z10-46-09 |
Determination of Interlaminar Tensile Shear Strength of Fiber Composite Structures |
| In-plane shear by Lap-Shear |
Airbus QVA-Z10-46-01 |
Determination of the Bond Strength of Adhesives |
| In-plane shear by Lap-Shear |
DIN 65148 |
Bestimmung der interlaminaren Scherfestigkeit im Zugversuch |
| In-plane shear by Lap-Shear |
ASTM D 3914 |
In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod |
| In-plane shear by Lap-Shear |
ASTM D 3846 |
Standard Test Method for In-Plane Shear Strength of Reinforced Plastics |
| In-plane shear by Lap-Shear |
CRAG method 102 |
|
| In-Plane Shear by ± 45° Laminates test |
ISO 14129 |
Bestimmung des Schermoduls und der Scherfestigkeit in der Lagenebene mit dem ± 45° Zugversuch |
| In-Plane Shear by ± 45° Laminates test |
EN 6031 |
Determination of in-plane shear properties (±45° tensile test) |
| In-Plane Shear by ± 45° Laminates test |
ASTM D 3518 |
In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate |
| In-Plane Shear by ± 45° Laminates test |
DIN 65466 |
Prüfung von unidirektionalen Laminaten; Bestimmung der Schubfestigkeit und des Schubmoduls im Zugversuch |
| In-Plane Shear by ± 45° Laminates test |
AITM 1-0002 |
Determination of in-plane shear properties (±45° tensile test) |
| In-Plane Shear by ± 45° Laminates test |
Airbus QVA-Z10-46-22 |
Bestimmung der Schubeigenschaften im Zugversuch von ± 45° CFK–Laminaten aus unidirektionalem Prepreg (Tape) oder Gewebe–Prepreg |
| In-Plane Shear by ± 45° Laminates test |
SACMA SRM 7-94 |
Inplane Shear Properties (±45?) |
| In-Plane Shear by ± 45° Laminates test |
RAE TR 88012 CRAG Method 101 |
In-plane shear |
| In-Plane Shear by ± 45° Laminates test |
JIS K 7079 |
In-Plane Shear Properties of Carbon Fiber Reinforced Plastics by Plus or Minus 45 Degrees Tension Method and Two Pairs of Rails Method |
| In-Plane Shear by ± 45° Laminates test |
ASTM D 3044 |
Shear Modulus of Wood-Based Structural Panels |
| In-Plane Shear by plate twist method |
ISO/CD 15310 |
Fibre-reinforced plastic composites — Determination of the in-plane shear modulus by the plate twist method |
| Specifikus nyíróvizsgálat |
ASTM D 4255 |
In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
| Specifikus nyíróvizsgálat |
ASTM D 5379 |
Shear Properties of Composite Materials by the V-Notched Beam Method (Iosipescu) |
| Specifikus nyíróvizsgálat |
ASTM D 7078 |
Shear Properties of Composite Materials by V-Notched Rail Shear Method |
| Specifikus nyíróvizsgálat |
ISO 15310 |
Fibre-reinforced plastic composites — Determination of the in-plane shear modulus by the plate twist method |
| Specifikus nyíróvizsgálat |
DIN 53399-2 |
Testing of reinforced plastics; shear test on plane specimens Prüfung von faserverstärkten Kunststoffen; Schubversuch an ebenen Probekörpern |
| Törési mechanika |
ISO 13586 |
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach |
| Törési mechanika |
ISO 15024 |
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials |
| Törési mechanika |
ISO 17281 |
Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s) |
| Törési mechanika |
ISO/CD 15114 |
Fibre-reinforced plastic composites — Determination of apparent mode II interlaminar fracture toughness for unidirectionally reinforced materials |
| Törési mechanika |
ESIS TC 4 |
Protocol for interlaminar fracture testing of composites |
| Törési mechanika |
EN 6033 |
Draft Document – Aerospace series – Carbon fibre reinforced plastics – Test method; determination of interlaminar fracture toughness energy; mode I, GIC |
| Törési mechanika |
EN 6034 |
Draft Document – Aerospace series – Carbon fibre reinforced plastics – Test method; determination of interlaminar fracture toughness energy; mode II, G<(Index)IIC> |
| Törési mechanika |
ASTM D 5045 |
Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials |
| Törési mechanika |
ASTM D 5528 |
Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| Törési mechanika |
ASTM D 6068 |
Determining J-R Curves of Plastic Materials |
| Törési mechanika |
ASTM D 6671 |
Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites |
| Törési mechanika |
ASTM WK22949 |
New Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites Using the End-Notched Flexure (ENF) Test |
| Törési mechanika |
ASTM E 1922 |
Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials |
| Törési mechanika |
CRAG method 600 |
Method of Test for Interlaminar Fracture Toughness of Fibre Reinforced Composites |
| Törési mechanika |
AITM 1.0005 |
Determination of interlaminar fracture toughness energy. Mode I. |
| Törési mechanika |
AITM 1.0053 |
Determination of fracture toughness energy of bonded joints, Mode I, GIC |
| Törési mechanika |
AITM 1.0006 |
Determination of interlaminar fracture toughness energy. Mode II |
| Törési mechanika |
Boeing BSS 7273 |
|
| Törési mechanika |
Boeing BMS 8-276 |
|
| Törési mechanika |
NASA method RP 1092 ST-5 |
Hinged double cantilever beam |
| Törési mechanika |
DIN 65563 |
|
| Thin wall Cylinder |
ASTM D 5448 |
In-Plane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| Thin wall Cylinder |
ASTM D 5449 |
Transverse Compressive Properties of Hoop Wound Polymer Matrix Cylinders |
| Thin wall Cylinder |
ASTM D 5450 |
Transverse Tensile Properties of Hoop Wound Polymer Matrix Cylinders |
| Lochleibung / Verbindungselemente |
ASTM D 5961 |
Bearing Response of Polymer Matrix Composite Laminates |
| Lochleibung / Verbindungselemente |
ASTM D953-02 |
Bearing strength |
| Lochleibung / Verbindungselemente |
ISO/DIS 12815 |
Fibre-reinforced plastic composites – Determination of plain-pin bearing strength |
| Lochleibung / Verbindungselemente |
DIN 65562 |
Bestimmung der Lochleibungsfestigkeit |
| Lochleibung / Verbindungselemente |
EN 6037 |
Bearing strength |
| Lochleibung / Verbindungselemente |
EN 13706-2 |
Spezifikationen für pultrudierte Profile Teil 2: Prüfverfahren und allgemeine Anforderungen |
| Lochleibung / Verbindungselemente |
AITM 1-0009 |
Determination of Bearing Strength by either Pin or Bolt Bearing Configuration. Faserverstärkte Kunststoffe; Bestimmung der Lochleibungsfestigkeit mit einer Stift oder Schraubenversuchsanordnung |
| Lochleibung / Verbindungselemente |
AITM 1-0065 |
Fiber reinforced plastics-Determination of joint strength of mechanically fastened joints |
| Lochleibung / Verbindungselemente |
TR 88012 CRAG Method 700 |
Bearing strength |
| Lochleibung / Verbindungselemente |
SACMA SRM 9-89 |
Bearing Strength Properties of Oriented Fiber-Resin Composites |
| Lochleibung / Verbindungselemente |
ASTM D 7248 |
Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
| Pull tests |
ASTM D 7332 |
Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite |
| Pull tests |
ASTM D 7522 |
Pull-Off Strength for FRP Bonded to Concrete Substrate |
| Fárasztó vizsgálat |
ISO 13003 |
Fibre-reinforced plastics — Determination of fatigue properties under cyclic loading conditions |
| Fárasztó vizsgálat |
ASTM D 3479 |
Tension-Tension Fatigue of Advanced Composites |
| Fárasztó vizsgálat |
ASTM D 6873 |
Bearing Fatigue Response of Polymer Matrix Composite Laminates |
| Fárasztó vizsgálat |
ASTM D 671 |
Flexural Fatigue of Plastics |
| Fárasztó vizsgálat |
HSR/EPM-D-002-93 |
Tension-Tension Load Controlled Fatigue Testing of Composite Materials Thermal Mechanical Fatigue (TFM) |
| Zug |
ASTM C297 |
Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions |
| Zug |
AITM 1-0025 |
Flatwise tensile test of composite sandwich panel |
| Zug |
EN 6062 |
Fibre Reinforced plastics- Test method- Flatwise tensile test of composite sandwich panel. |
| Druck |
ASTM C365 |
Flatwise Compressive Strength of Honeycombs |
| Druck |
ASTM D351 |
Edge Strength of Honeycombs |
| Druck |
ASTM D 5467 |
Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam |
| Scher |
ASTM C273 |
Core Shear of Sandwich Honeycombs |
| Scher |
Airbus QVA-Z10-46-06 |
Determination of the Shear Strength of Joint Adhesives in Shear Test of Pipes |
| Scher |
DIN 53294 |
Kernverbunde, Schubversuch |
| Biege |
ASTM C393 |
Flexural Properties of Sandwich Honeycombs |
| Biege |
DIN 53293 |
Biegeversuch |
| Biege |
AITM 1.0018 |
Sandwich flexural test – 4 point bending |
| Peel |
ASTM D1781 |
Climbing Drum Peel |
| Peel |
ASTM D1876 |
T-Peel Test |
| Peel |
ASTM D3167 |
Floating Roller Peel |
| Peel |
Airbus QVA-Z10-46-05 |
Determination of Drum Peeling Force of Adhesives and Adhesive Prepregs During Drum Peeling Test |
| Peel |
Airbus QVA-Z10-46-03 |
Determination of the Peel Strength of Adhesives in Floating Roller Peel Tests (Bell) |
| Fatigue |
ASTM C394 |
Standard Test Method for Shear Fatigue of Sandwich Core Materials |